Machining Price Guide

How much should you pay for your custom machined parts?

Machining-4U provides you with the lowest prices available for your custom CNC machining needs. By connecting directly with independent machinists, you can avoid the huge markups charged by large CNC manufacturing companies.

Whether you're looking for CNC routing, CNC milling, or any other CNC machining services, you will be able to find what you need at an affordable price.

To give you a better idea of what you should expect to pay for your precision machining job, search for the latest custom machined part prices below.

There are no hidden costs or unwanted surprises. The price you see is the price you pay.

  • Shipping fees are included in the price.
  • Jobs posted in "private" mode are not displayed here.
Enter the type of part you are looking for. For example : spacer, ring, plate, axis, cylinder ...
 

Shaft 1

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 9-Jun,2022

1 off, made out of stainless steel 303 or 304 please

1 off, made out of stainless steel 303 or 304 please

Gareth A

80 £
(inc VAT)

Shaft 2

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 9-Jun,2022

1 off, made out of stainless steel 303 or 304 please

1 off, made out of stainless steel 303 or 304 please

Gareth A

100 £
(inc VAT)

ZWO EAF Samyang Mount Plate

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 1-Jun,2022

Aluminium, 1 part

Aluminium, 1 part

ed.harding@rollingcircle.net A

60 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

Aluminium Pad Holders

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 25-May,2022

Dimensions as per picture Quantity required: 25 Material: Aluminum Tolerance: +/ ...

Dimensions as per picture Quantity required: 25 Material: Aluminum Tolerance: +/- 0.1mm

Uspares A

259 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

Two Stainless Steel Rods With M5 Tapping

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 13-May,2022

Hi, I need two rods (different lengths) turned with M5 tapping at each end. Idea ...

Hi, I need two rods (different lengths) turned with M5 tapping at each end. Ideally made from 304 grade ground steel bar. Other grades could work too. Tolerances stated on drawing. Delivery to UK

Ryan.Gray93 A

65 £
(inc VAT)

Window Grouting Shield

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 10-May,2022

Small jig made of PTFE to improve grout sticking. Considts of 2 pieces held toge ...

Small jig made of PTFE to improve grout sticking. Considts of 2 pieces held together by an M4 nut and bolt. 2off required (i.e. 4 pieces). Some milling required for the stadium shaped piece. Care as PTFE is a plastic which will melt under cutting stress temperature rise. Ignore drawing printed tollerances 0.1 mm is fine.

Skyline A

237 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

Remote coolant thermostat housing flange

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 4-May,2022

Material: 6082 T6 Aluminium Tolerance: +/- 0.1mm Holes tapped: M8 * 1.25

Material: 6082 T6 Aluminium Tolerance: +/- 0.1mm Holes tapped: M8 * 1.25

ppyvabw A

65 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

4 x amended rods, 1 x cross-clamp

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 27-Apr,2022

3 x short lengths of 30mm rod with centre holes of different sizes 1 x short len ...

3 x short lengths of 30mm rod with centre holes of different sizes 1 x short length of 30mm rod step-down to smaller diameter 1 x 2-part cross clamp, 1.5" circular to 30mm square clamp.

hbsnew A

285 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

Sleeve / Ring / Spacer

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 11-May,2022

Hi, I need a (1) sleeve making from 304 stainless please. It needs to be 50mm od ...

Hi, I need a (1) sleeve making from 304 stainless please. It needs to be 50mm od and 40mm id with an overall length of 18mm. Thanks.

cde1000 A

40 £
(inc VAT)
    • 5
    • Quality
    • Deadlines
    • Communication
    • Professionalism

2 x mounting blocks

Purchased for
Evaluation received
Custom Machined Parts
Public |Posted 16-Mar,2022

2 simple aluminium 6082 mounting blocks for use in the film industry. standard t ...

2 simple aluminium 6082 mounting blocks for use in the film industry. standard tolerances. I need 2 of each for the first run. tapped holes 1/4-20 UNC, 3/8-16 UNC, ISO M6 delivery London, UK

hbsnew A

245 £
(inc VAT)
    • 4.8
    • Quality
    • Deadlines
    • Communication
    • Professionalism
1...